BF Electronics

Sort By:  
This kit is used to replace broken or worn out rubber buffer blocks for 50Kg Thrustmaster Pro and T3PA load cell mod.
$20.00
Convert your T3PA, T-GT and T3PA Pro pedals into a 10bit (0-1023 resolution) USB pedal set. Works with our Load cell mod kits.
$39.00
DIY head tracking, 3 x IR LED's installed on a frame to be attached to your own baseball cap . Go to end of listing for downloads.
$55.00
DIY head tracking, 3 x IR LED's installed on a frame to be attached to your own baseball cap . Go to end of listing for downloads.
$65.00
DIY head tracking, 3 x IR LED's treaded into the lining of a baseball cap (random cap type) . Go to end of listing for downloads.
$75.00
DIY head tracking, 3 x IR LED's treaded into the lining of a baseball cap (random cap type) powered via 4 AAA batteries incl. switch. Go to end of listing for downloads.
$85.00
The fans are connected via a cigarette plug ithe an inline speed controller and switch
$99.00
Control your own sim fans with this controller, has 2 outputs to control 2 x fans.
$120.00
Add a BMW E36 dash to your sim rig, shows Speed, Revs, fuel level and water temp.
$130.00
Upgrade your T3PA-Pro pedals with Thrustmaster Brake mod with a 50 Kg Load Cell Plug & Play Pro kit. (MUST HAVE Thrustmaster Brake mod fitted)
$145.00
Upgrade your T3PA-Pro pedals that do not have a Thrustmaster Brake mod fitted by replacing the old potentiometer style brake with a 50Kg load cell.
$145.00
Upgrade your Load Cell Kit to your T3PA pedals replacing the old potentiometer style brake with this 50Kg load cell mod. Plug and Play version
$145.00
Load Cell Kit for the budget minded, simple to install for your T3PA pedals replaces the potentiometer style brake with a 20Kg load cell mod. Plug and Play version
$145.00
Upgrade your Logitech pedals with the latest Load Cell Kit which includes a USB converter to add greater sensitivity and a more realistic pedal feel and operation in game.
$185.00
2 x desk mount fans controlled by Simhub, can be adjusted as a constant flow or be controlled by the speed of the car. Works in most sims/games.
$265.00
Replacement cup and rubber kit for Thrustmaster 50Kg load cell mods. (BUFKIT-5)
Replacement buffer block kit for 50Kg load cell mods, this replacement is a delicate procedure as the wires connected to the load cell sensor are very tiny and can easily break.

We do offer a replacement service for an additional AU$40.00 plus post.

Kit comprises of;

2 x 3D printed mounting cups.
2 x rubber buffer blocks.
1 x mount screw.
1 x small tube supa glue.

Free post within Australia - for international buyers please go to similar listing under spare parts.
This kit is used to replace broken or worn out rubber buffer blocks for 50Kg Thrustmaster Pro and T3PA load cell mod.
$20.00
Thrustmaster USB pedal adapter for PC. (USB adapt)
This device converts your standard Thrustmaster pedals into USB to run on PC.

Features:

* No Drivers.
* PC only.
* No power required (uses USB power).
* Compatible with USB 2.0 and greater.
* Converts 8 bit (0-255) to 10 bit (0-1023).
* Pedals plug directly into the adapter.
* Increase lap times and control with higher resolution.

Why is the pedal sensitivity increased when using a USB adapter?

The standard pedals send a signal range of 256 possible steps to the wheelbase for pedal position in game whereas using the USB adapter the signal range is increased to 1024 possible steps directly to the game thus increasing the sensitivity of the pedal positioning data.  

To calibrate run the inbuilt Windows joystick calibration tool. instructions here.

Just plug your pedals into the adapter and the USB cable into the PC.

THAT’S it YOUR DONE!! Easy !!!

last updated 7/03/2021
Convert your T3PA, T-GT and T3PA Pro pedals into a 10bit (0-1023 resolution) USB pedal set. Works with our Load cell mod kits.
$39.00
Track-Frame USB, 3 point head tracking IR transmitter
Head motions are tracked with six degrees of freedom (6DOF), specifically; yaw, pitch, roll, left/right, up/down and forward/back. This is done by means a webcam, which is placed in front of you usually mounted to a monitor and tracks the movements of the gamers head. 

The Track-Frame consists of 3 x infrared LEDs mounted in formation on a standalone frame which emits IR light into the modified web cam. Using FreeTrack, OpenTrack or similar software outputs head tracking data via the 3 x IR LED's directly using TrackIR™, SimConnect and FSUIPC interfaces, programs that support these interfaces are regarded as having FreeTrack/OpenTrack support.

Unit is powered via USB from a PC, mobile phone charger or power bank.

If you require a Sony Eye-Camera lens mounted IR pass filter message us on checkout, it is free with head tracking devices.

DOWNLOADS:

Free Track
Free Track Manual

Open Track
DX9
Eye-Camera drivers

TUTORIALS:

SIM-UK
I FLY CENTRAL
KIWI MACE (IOS)
PARTICULARPIXELS
DIY head tracking, 3 x IR LED's installed on a frame to be attached to your own baseball cap . Go to end of listing for downloads.
$55.00
Track-Frame with battery, 3 point head tracking IR transmitter
Head motions are tracked with six degrees of freedom (6DOF), specifically; yaw, pitch, roll, left/right, up/down and forward/back. This is done by means a webcam, which is placed in front of you usually mounted to a monitor and tracks the movements of the gamers head. 

The Track-Frame consists of 3 x infrared LEDs mounted in formation on a standalone frame which emits IR light into the modified web cam. Using FreeTrack, OpenTrack or similar software outputs head tracking data via the 3 x IR LED's directly using TrackIR™, SimConnect and FSUIPC interfaces, programs that support these interfaces are regarded as having FreeTrack/OpenTrack support.

Unit is powered a battery box held on by 2 x double sided velcro straps with a battery box with on/off switch to turn of tracking frame when not being used.

If you require a Sony Eye-Camera lens mounted IR pass filter message us on checkout, it is free with head tracking devices.

DOWNLOADS:

Free Track
Free Track Manual

Open Track
DX9
Eye-Camera drivers

TUTORIALS:

SIM-UK
I FLY CENTRAL
KIWI MACE (IOS)
PARTICULARPIXELS
DIY head tracking, 3 x IR LED's installed on a frame to be attached to your own baseball cap . Go to end of listing for downloads.
$65.00
Track-Cap USB, 3 point head tracking IR transmitter
Head motions are tracked with six degrees of freedom (6DOF), specifically; yaw, pitch, roll, left/right, up/down and forward/back. This is done by means a webcam, which is placed in front of you usually mounted to a monitor and tracks the movements of the gamers head. 

The Track-Cap consists of 3 x infrared LEDs mounted in formation which emits IR light into the modified web cam. Using FreeTrack, OpenTrack or similar software outputs head tracking data via the 3 x IR LED's directly using TrackIR™, SimConnect and FSUIPC interfaces, programs that support these interfaces are regarded as having FreeTrack/OpenTrack support.

Unit is powered via USB from a PC, mobile phone charger or power bank.

If you require a Sony Eye-Camera lens mounted IR pass filter message us on checkout, it is free with head tracking devices.

DOWNLOADS:

Free Track
Free Track Manual

Open Track
DX9
Eye-Camera drivers

TUTORIALS:

SIM-UK
I FLY CENTRAL
KIWI MACE (IOS)
PARTICULARPIXELS
DIY head tracking, 3 x IR LED's treaded into the lining of a baseball cap (random cap type) . Go to end of listing for downloads.
$75.00
Track-Cap Battery, 3 point head tracking IR transmitter .
Head motions are tracked with six degrees of freedom (6DOF), specifically; yaw, pitch, roll, left/right, up/down and forward/back. This is done by means a webcam, which is placed in front of you usually mounted to a monitor and tracks the movements of the gamers head. 

The Track-Cap consists of 3 x infrared LEDs mounted in formation which emits IR light into the modified web cam. Using FreeTrack, OpenTrack or similar software outputs head tracking data via the 3 x IR LED's directly using TrackIR™, SimConnect and FSUIPC interfaces, programs that support these interfaces are regarded as having FreeTrack/OpenTrack support.

Power is delivered via a small battery box which is held via double sided velcro tapes on the rear adjustable cap band. The battery box has an on/off switch to enable the unit to be turned off when not in use. 

If you require a Sony Eye-Camera lens mounted IR pass filter message us on checkout, it is free with head tracking devices.

DOWNLOADS:

Free Track
Free Track Manual

Open Track
DX9
Eye-Camera drivers

TUTORIALS:

SIM-UK
I FLY CENTRAL
KIWI MACE (IOS)
PARTICULARPIXELS
DIY head tracking, 3 x IR LED's treaded into the lining of a baseball cap (random cap type) powered via 4 AAA batteries incl. switch. Go to end of listing for downloads.
$85.00
Dual Fans, 12 Volt for caravan and camping
No more hogging the cool breeze! Dual fans means you can both keep cool.
Individual adjustment so you can point them precisely where you want to.
Multi-speed control, 12VDC powered, with a 2m cigarette lighter cable provided.
Features:
- Dual 130mm fans with variable speed control
- 12VDC powered
- Clamp mounting
- Fans can be individually rotated and pivoted

Specifications:

Power: 12VDC,
360 degree multi-direction adjustment

Ideal for Caravaning, Camping, Boating and Sim Racing :)
The fans are connected via a cigarette plug ithe an inline speed controller and switch
$99.00
Sim Fan controller
This is a bare bones option for the budding maker who wants to not only use it but has satisfaction from also building for themselves.

The controller consists of an Arduino Uno and a 30 Amp motor shield. The controller is assembled, programmed and tested.

The Arduino is pre programmed ready to be used with SimHub software downloaded from https://www.simhubdash.com.

The author of Simhub (developer "Wotever") offers the software for free and only asks for a donation to help him continue to add more devices and game driver compatibility. We recommend you donate around $5 as a minimum but is not compulsory we feel sure once you start using the software you will agree should be supported.

Most devices on this site are controlled by SimHub software.  

** THIS PRODUCT IS MADE TO ORDER ** Allow 2 weeks for delivery.

Extra Items you can order with this kit:

12 Volt 8 Amp Power supply
USB cable
Jiffy Box to enclose the circuit boards



Control your own sim fans with this controller, has 2 outputs to control 2 x fans.
$120.00
BMW E36 Dash Cluster
THIS MOD IS FOR PC ONLY SIMS - NO CONSOLES.

This is a genuine BMW E36 cluster that have been modified to provide RPM, SPEED, FUEL LEVEL, and a fixed TEMP in most simracing titles.

The odometer is tied to the speedo so the actual kilometers count does increase with distance, the resettable trip meter also works (if power removed the resettable counter resets to zero), the fuel gauge works in most games and low fuel light illuminates at about 25-30 litres remaining. The dash lights are wired ON permanently.

As the cluster was purchased secondhand there may be a few minor scratches and blemishes beyond our control. The 3 months warranty offered only covers the arduino mod itself and incase of a failure only the arduino mod is covered.

A Gear Number display can be added as an optional extra, the Gear number is mounted inside of the dash cluster and covers 3 existing lamp not used in the mod.

The Dash comes with a 12 volt 2.5 amp power pack and USB cable. The dash uses "SimHub" available at https://www.simhubdash.com/ it is donateware and recommend you donate something to the developer for his excellent programming. When checkout is complete the buyer will receive via email the Simhub setup instructions and protocol file to get the dash and/or gear display working.

PLEASE NOTE: as simhub is continually getting upgraded the pictures in the instructions may vary to the current version of simhub but are still relevant.

Download the Simhub dash setup manual here.
Protocol text file.
Add a BMW E36 dash to your sim rig, shows Speed, Revs, fuel level and water temp.
$130.00
PPP-LC-5 T3PA-Pro 50Kg Load Cell Kit (Plug & Play) (PPP-LC-5)
Please note the design has changed so the photos are explanation only. (pics updated soon)

ALSO REQUIRES THE THRUSTMASTER BRAKE MOD INSTALLED

 Great mod for Thrustmaster Users.
 Adjustable pedal position.
 USB Saver —Plugs into the wheelbase.
 Adds more pressure to a set of pedals that normally has a light brake.
 Better feeling race car like pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Easy to Install, like a factory mod.
 Can race in shoes.
 Also works when pedals are Inverted.
 Very reduced pedal throw.
 LOAD CELL strength 50Kg.
 Adjustable sensitivity at the wheel base.
 Lower lap times making you faster.
 Works with Leo Bodnar USB adaptor.

Watch a review of the T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

Includes the load cell with mount and control box.

As with all versions this load cell kit replaces the existing potentiometer with a Load Cell and electronics and adjustment potentiometer mounted in a remote control box somewhere near the wheel base (up to you).

Unlike the T3PA-Pro (Non Plug & Play) version this kit does NOT require the pedals to be dis-assembled to install the mod. Simply mount the load cell kit on to the Thrustmaster Brake mod bracket, plug the original pedal cable into the control box and plug the load cell cable into the load cell socket then plug the control box cable into your wheel base.

Download the install manual here.
last updated 28/06/2020

       
THRUSTMASTER SPRING OR CONICAL RUBBER BRAKE MOD
Upgrade your T3PA-Pro pedals with Thrustmaster Brake mod with a 50 Kg Load Cell Plug & Play Pro kit. (MUST HAVE Thrustmaster Brake mod fitted)
$145.00
ELC-5 T3PA-Pro 50Kg Load Cell Kit (ELC-5)
Please note the design has changed so the photos are explanation only. (pics updated soon)

For T500 pedal owners, please check this before ordering.

This mod was designed for the earlier set of pedals (including T500 pedals) that did not have a Thrustmaster brake mod (see pics below), but can be fitted to later model pro pedals if you prefer a lighter pedal with almost the same travel as the original.

Watch a review of the T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

 Great mod for Thrustmaster Users.
 USB Saver —Plugs into the wheel base.
 Adds more pressure to a set of pedals that normally has a light brake.
 Better feeling pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Easy to Install, like a factory mod.
 Can race in shoes.
 Also works when pedals are Inverted.
 Maintains a good pedal throw.
 Works in GT or inverted style pedal positions.
 Adjustable sensitivity at the wheel base.
 Load Cell strength = 50Kg.
 Lower lap times making you faster
 Works with Leo Bodnar USB Adaptor

The kit includes the load cell and electronics and a remote adjustment box. 

1. Load cell mounted in a frame that also houses the electronics.
2. Adjustment controller, mounted near the wheel base.
3. Cabling.
4. Buffer block and nylon tie etc.

As the electronics is mounted in the load cell frame the control remotely mounted near the wheelbase which houses the potentiometer used to calibrate and fine tune just how you want your brake to feel. The electronics housed in the load cell frame converts the tiny changes in the load cell into a 0—3V variable signal that the wheelbase can understand.

The installation does NOT require the cutting of any wires as the existing cable from the pedals is plugged into the load cell making this a plug and play kit with some disassembly of the pedals required.

Download the install manual here.
Last updated 28/06/2020

         
                                  (Updated pics of new model will be posted soon)
Upgrade your T3PA-Pro pedals that do not have a Thrustmaster Brake mod fitted by replacing the old potentiometer style brake with a 50Kg load cell.
$145.00
STD-PP-5 T3PA 50Kg Load Cell Kit (STD-PP-5)
Please note the design has changed so the photos are explanation only. (pics updated soon)

THIS MOD REQUIRES THRUSTMASTER CONICAL BRAKE MOD.

 Great mod for Thrustmaster Users.
 USB Saver —Plugs into the wheel base.
 Adds much more pressure to a set of pedals that normally has a light brake.
 Better feeling pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Easy to Install.
 Shorter pedal throw.
 LOAD CELL strength 50Kg.
 Adjustable sensitivity at the wheel base.
 Lower lap times making you faster.
 Race car hard pressure pedal feel
 Suitable for the T-GT all metal pedal set.
 Works with Leo Bodnar USB adaptor.

Watch a review of the T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

The 50Kg load cell is only recommended for the T-GT pedal set as the product manual by Thrustmaster states that the T-GT pedals are rated at 80Kg. In an email from Thrustmaster support the standard T3PA pedals are rated at 25Kg, quote "With the conical brake module installed the brake pedal can withstand to a pressure of up to 25kg.” With that in mind we recommend the 20Kg Version, we have sold many 50Kg versions to customers owning T3PA pedals with no reports of breakage.
 
So buyer beware and purchase at your own risk.

Link to 20Kg Version:

The load cell is mounted to a steel rail, and has a built in Thrustmaster RJ12 socket where the cable from the pedals is inserted, also housed in the load cell base is the associated electronics with a fixed cable that extends to the wheel base via a small box that houses the sensitivity adjustment knob just behind the wheel base.

The electronics in the load cell base converts the tiny changes in the load cell into a 0—3V variable signal that the wheelbase can understand. The control box also has a cable to plug into the wheelbase and a cable to plug into the load cell.

It is simple to install, all you do is mount the load cell kit to the existing “Thrustmaster conical brake mod” bracket. Plug in the existing cable into the control box and take the provided cable with the control box and plug it into your wheelbase.

THAT’S it YOUR DONE!! Easy !!!

Download the install manual here.
last updated 28/06/2020


THRUSTMASTER CONICAL
          BRAKE MOD
Upgrade your Load Cell Kit to your T3PA pedals replacing the old potentiometer style brake with this 50Kg load cell mod. Plug and Play version
$145.00
STD-PP-2 T3PA 20Kg Load Cell Kit (STD-PP-2)

THIS MOD REQUIRES THRUSTMASTER CONICAL BRAKE MOD.

 Great mod for Thrustmaster Users.
 USB Saver —Plugs into the wheel base.
 Adds much more pressure to a set of pedals that normally has a light brake.
 Better feeling pedal with better pedal modulation.
 Maintains cross compatibility—Xbox/PS4/PC.
 Easy to Install.
 Short pedal throw.
 LOAD CELL strength 20Kg.
 Adjustable sensitivity at the wheel base.
 Lower lap times making you faster.
 Race car hard pressure pedal feel
 Also suitable for the T-GT all metal pedal set.
 Works with Leo Bodnar USB adaptor.

Watch a review of the T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

The 20Kg load cell is recommended for the standard T3PA pedal set. In an email from Thrustmaster support the 50Kg version is not recommended for the T3PA pedals, here is quote from Thrustmaster "With the conical brake module installed the brake pedal can withstand to a pressure of up to 25kg.” With that in mind we only recommend the 20Kg Version, we have sold many 50Kg versions to customers owning T3PA pedals with no reports of breakage.
 
So buyer beware and purchase at your own risk.

The load cell is mounted to a 3D printed frame which is bolted to the Thrustmaster conical brake mod bracket, the load cell frame has the electronics (circuitry to convert the tiny changes in the load cell into a 0—3V variable signal that the wheelbase can understand) built in RJ12 offset socket where the pedal cable plugs into.

The control box mounted near the wheelbase simply houses an adjustment potentiometer and facilitates easy calibration adjustment while being seated.

The load cell is simple to install, all you do is mount the load cell kit to the existing “Thrustmaster conical brake mod” bracket. Plug in the existing cable into the load cell and take the provided cable with the control box and plug it into your wheelbase.

THAT’S it YOUR DONE!! Easy !!!

Download the install manual here.
last updated 28/06/2020


THRUSTMASTER CONICAL
          BRAKE MOD
Load Cell Kit for the budget minded, simple to install for your T3PA pedals replaces the potentiometer style brake with a 20Kg load cell mod. Plug and Play version
$145.00
LT-5 50Kg USB Load Cell Kit for Logitech Pedals (PC only) (LT-5)
Please note the design has changed as the photos are of the prototype model.

THIS MOD ONLY REQUIRES a screwdriver, spanner and 2 x allen keys to install. Due to production and wiring changes in Logitech pedal manufacture this mod is for use with a USB adapter. There are too many variations to supply multiple versions of the same kit for the Logitech pedals.

For those adventurous simmers or console gamers it is possible to use without a USB adapter with a little experimentation however we only supply this kit as USB. No advise or warranty is given if you wish to adapt this kit yourself.  

 Great mod for Logitech Users.
 complete with USB adapter (PC ONLY). 
 Adds much more pressure to a set of pedals that normally has a light brake.
 Better feeling pedal with better pedal modulation.
 Included USB adapter which increases pedal sensitivity (see below for explanation).
 Easy to Install (some basic skills needed to install).
 Shorter pedal throw.
 LOAD CELL strength 50Kg.
 Adjustable sensitivity at the wheel base.
 Lower lap times making you faster.
 Race car hard pressure pedal feel (with small dead zone for left foot braking).
 Works with other USB adaptors (Leo Bodnar adapters tested).
 USB adapter is discounted 25% with this kit.

Watch a review of our Thrustmaster T3PA-Pro Load Cell Kit, by Shaun Cole of "The Simpit".

https://www.youtube.com/watch?v=uniCufaRY3Y

This mod requires you to install the load cell hardware inside the pedal base itself so the pedals require for the removal of the pedal faces and top panel of the pedals. The 3 wires from the existing brake potentiometer are to be removed and the pedal base frame removed from the pedal base (4 screws). Not to panic as these operations are very simple to perform (see manual).

The load cell is mounted using the existing pedal base frame and bolts directly to the frame base with no drilling or modification at all to the existing pedals. The only modification that needs to be done is enlarge the existing cable access hole in the rear of the pedals to allow for the adjustment box cable to be extended out. Also cut away a small portion of the inside top cover to make room for the load cell main body.

Plug the existing pedal cable into a USB adapter and the USB cable into your PC. Then run the calibration control box cable up to the wheelbase and mount the small box (potentiometer control) at a convenient location to allow pedal calibration whilst seated at the wheel. 

The electronics in the small 3D printed box (inside the pedal base) converts the tiny changes in the load cell into a 0—3V variable signal that the wheelbase can understand. The control box behind the wheelbase is used to adjust the sensitivity of the load cell.

Why is the pedal sensitivity increased when using a USB adapter?

The standard pedals send a signal range of 256 possible steps to the wheelbase for pedal position in game whereas using the USB adapter the signal range is increased to 1024 possible steps directly to the game thus increasing the sensitivity of the pedal positioning data.  

To calibrate run the inbuilt Windows joystick calibration tool. instructions here.

THAT’S it YOUR DONE!! Easy !!!

Download the install manual here.
last updated 7/03/2021


Upgrade your Logitech pedals with the latest Load Cell Kit which includes a USB converter to add greater sensitivity and a more realistic pedal feel and operation in game.
$185.00
Sim wind kit
SIM WIND FANS

The Sim Wind gives you a sensation of driving with wind on your face. As your speed increases so does the wind in your face. The faster you go the faster the fans spin.The fans run on an Arduino MCU and is driven by the SIMHUB App by developer “wotever”.

The SIMHUB free/donateware software can be downloaded from https://www.simhubdash.com.  Please support the developer by donating to keep him adding more features and game compatibility. As the fan has powerful airflow there is no need for addition of air straighteners, even though the fans are electronically controlled there is a manual “inline” speed controller dial/switch.

SIM WIND CONTROLLER BOX

The Arduino MCU is the heart of the SIM WIND FAN controller and is used to change the fan settings. However, as the fans are controlled by SIMHUB many other accessories can be added such as Tachometer, Gear Number display, Speedo’s, Boost Gauge, pedal vibration motors etc.(SimHub wiki on www.racedepartment.com).

The SIM WIND system is compatible with many games such as Assetto Corsa 1&2, Project Cars 1&2, RF1&2, Grid titles, F1 Titles, iRacing, Dirt Titles and more.

SIMPLE SETUP.

Install the SimHub App onto your PC.

1. Plug the USB cable from the control box to your PC.
2. Plug the fans into the control box.
3. Connect the power supply.
4. Configure your game (see included manual)
5. Ready to race

The package includes the following:
 Control Box.
 Dual SIM WIND fans.
 12V power supply.
 1x USB cable.
2 x desk mount fans controlled by Simhub, can be adjusted as a constant flow or be controlled by the speed of the car. Works in most sims/games.
$265.00
Per Page      1 - 15 of 15
  • 1